Packing image: filling 3g-5g gynecological gel PP sterile tube

Figure 3: physical map

Equipment Overview:

 

The gel filling machine set mechanical, pneumatic, automatic as one. It has a high degree of automation, high yield, wide adaptability, good stability and other characteristics, which has been favored by the majority of users. Now the models are more mature and mature, with high technological content, good adaptability, excellent quality characteristics, for the gel manufacturer"s ideal dedicated filling equipment!

 The machine has automatic management, automatic pipe, tube automatic detection (tube filling, no tube is not filling), filling (filling measurement adjustable), automatic drop cover, automatic gland and other functions. Compared with the same filling machine, the machine is stable, low noise, high yield, easy maintenance, that is safe and stable. The machine after the company"s technical staff of the deepening of the technology can be well adapted to the full operation of the tube (domestic original), is fully in line with GMP drug production specifications of the ideal gel filling equipment. The machine is suitable for the production of ointment, cosmetics, glue, latex, gel and other products, for the special packaging materials, the company can also be specially designed and manufactured. Welcome,

 

First, the equipment outlined:

    The structure of the gel dispenser can be divided into two parts: pipe management machine, rational push rod, stopper head, assembling machine, filling machine and card cover machine. The jacket is finished by two double helix And the delivery of the bottle into the bottle into the chain filling machine, and then by the chain gap movement will be sent to the various units of the jacket, until the completion of all the work, cover finishing and delivery consistent with the principle of jacket.

 

Second, the function brief:

    The machine is fully automatic equipment, with automatic management jacket, arranged, into the station, no jacket to stop the host, more material automatically stop the material. No sets of no irrigation, no sets on the cover, no overhead shutdown, more material to stop the material, automatically out of finished materials, plus finished conveyor belt.

Third, the principle of machine operation:

-1 man-made gel tube and cover were placed in the hopper hopper, and then by the hoisting machine mentioned mechanical management machine, gel tube after finishing into the conveyor belt. And then pushed by the cylinder tube into the cycle of the timing belt on the mold block, into the next station.

Conveyor belt: When the pipe to be filled is fed into the filling machine by the conveyor belt, it is fed into the working main turntable by the turning mechanism.

-3 photoelectric detection station: the station"s photoelectric sensor to detect whether the filling (tube filling, no tube filling).

Filling station: When the gel tube reaches the filling station, if the previous photoelectricity detects the presence of the tube, that is, the filling of the internal chip, the internal chip sends out the filling signal; the filling gun is automatically moved down into the tube, Filling the cylinder (Pneumatic Actuator) to open the filling valve, the gel is automatically injected into the tube.

-5 automatic drop-off station: the cap through the automatic drop-off mechanism of finishing, in order to enter the automatic drop-off station, the same is based on the front photoelectric detection signal, if the detection signal for the station on the tube, then the internal The control chip closes the cap by controlling the upper cylinder.

-6 Glove station: the tube that leaves the cap into the gland station, by a special mechanism to tighten the cover on the gel tube.

-7- Discharge station: the station to complete the final filling of finished product output, the product by the role of the fork from the slanting track to send the conveyor belt.


Fourth, the technical parameters